Elektronik: Unterschied zwischen den Versionen

Aus Wiki_2020
← Zum vorherigen Versionsunterschied
Wezi (Diskussion | Beiträge)
2.767 Bearbeitungen
Wezi (Diskussion | Beiträge)
2.767 Bearbeitungen
 
(79 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
== Elektronik ==
== Elektronik ==
=== Datasheets ===
<div style="column-count:2">
*Analog
**[https://www.analog.com/media/en/technical-documentation/data-sheets/4015fb.pdf Multichemistry Buck Battery Charger Controller with Digital Telemetry System]<br>
-----------------
*Diodes
**[https://www.diodes.com/assets/Datasheets/AP22913.pdf  AP22913 Highsideswitch 1,4..5V]<br>
-----------------
*Holtek
**[https://www.holtek.com/productdetail/-/vg/73xx HT7333 3,3V LDO]
-----------------
*Microchip
**[https://ww1.microchip.com/downloads/en/devicedoc/20001952c.pdf MCP23017 16Bit Portexpander I²C]
-----------------
*NXP
**[https://www.nxp.com/docs/en/data-sheet/PCF8574_PCF8574A.pdf PCF8574P 8Bit Portexpander I²C]
-----------------
*ST
**[https://www.st.com/resource/en/datasheet/ld1117.pdf LD1117] Festspannungsregler Low Dropout (1V)
-----------------
*JST
**[https://www.jst-mfg.com/product/index.php?series=277 JST-HX Connectors]
</div>
---------------------------------------------------------
=== Messtechnik ===
* UNI-T UT61E
**https://www.eevblog.com/forum/beginners/uni-t-ut61e-europeans-version-dead-by-a-rechargable-battery/
**https://elektrotanya.com/uni-t_ut61e.pdf/download.html
* DMM Kalibrieren
**https://www.messerforum.net/threads/multimeter-pruefen-kalibrieren-justieren.100485/<br>
**https://voltagestandard.com/<br>
**https://www.dmmcheckplus.com


=== Projects ===
=== Projects ===
Zeile 5: Zeile 38:
*https://www.electroschematics.com/solar-boost-converter-mppt-charge-controller/
*https://www.electroschematics.com/solar-boost-converter-mppt-charge-controller/
=== To be categorized ===
=== To be categorized ===
*[https://www.definefalsetrue.com/index.php/de/hardwareprojekte/60-pwm-mit-ne555 PWM]
*[https://www.eltima.com]
*[https://www.eltima.com]
*[http://www.repairfaq.org/ repairfaq.org]
*[http://www.repairfaq.org/ repairfaq.org]
Zeile 10: Zeile 44:
*[http://www.pyroelectro.com/ Weltweite Elektronikprojekte]
*[http://www.pyroelectro.com/ Weltweite Elektronikprojekte]
*[http://mfprojects.co.uk/index.php Schaltungssammlung]
*[http://mfprojects.co.uk/index.php Schaltungssammlung]
=== ADS-B ===
*[http://www.rtl-sdr.com/adsb-aircraft-radar-with-rtl-sdr/ ADSB SDR Tutorial]
*[http://forum.planefinder.net/threads/ads-b-diy-antenna.23/ Antennen]
*[http://www.balarad.net/ Coaxial Linear Antenne]
*[https://www.rs-online.com/designspark/build-a-pi-powered-plane-watcher?cm_mmc=DE-EM-_-DSN_20171120-_-DM78696-_-TTB_URL4&cid=DM78696&bid=511203632 Raspibased Skywatcher]
*[http://blog.wenzlaff.de/?p=7410 flugdaten auswerten rrd]
*[https://forum.flightradar24.com/forum/radar-forums/flightradar24-feeding-data-to-flightradar24/11792-beginner-feed-both-fr24-und-fa-with-raspberry-pi-3-model-b-lightaware-pro-stick? feed both FR24 und FA with Raspberry Pi 3 Model B+, FlightAware Pro Stick+]
* http://www.satsignal.eu/raspberry-pi/dump1090.html
* http://zr6aic.blogspot.com/2013/02/setting-up-my-raspberry-pi-as-sdr-server.html
* https://www.bjoerns-techblog.de/2018/10/virtual-radar-server-auf-rpi/
* http://www.virtualradarserver.co.uk/Mono.aspx#mono-4-issues


=== Antennen ===
=== Antennen ===
Zeile 50: Zeile 71:


=== Online Design Tools ===  
=== Online Design Tools ===  
 
*[https://logigator.com/ Logigsimulator]
*[https://www.snapmagic.com/ AI-PCB Tool]
*[http://www.ti.com/lsds/ti/analog/powermanagement/reference_design.page Texas Instruments Power Management]
*[http://www.ti.com/lsds/ti/analog/powermanagement/reference_design.page Texas Instruments Power Management]
*[http://www.analog.com/en/content/Signal_Chain_Designer/fca.html Analog Devices Signal Chain Designer ]
*[http://www.analog.com/en/content/Signal_Chain_Designer/fca.html Analog Devices Signal Chain Designer ]
Zeile 74: Zeile 96:
*[http://redpitaya.com/ Modulares OpenInstruments Messsystem]
*[http://redpitaya.com/ Modulares OpenInstruments Messsystem]
*[http://www.eevblog.com/forum/testgear/intronix-logicport-compendium/ Intronix Logicport Links,Tutorials etc.]
*[http://www.eevblog.com/forum/testgear/intronix-logicport-compendium/ Intronix Logicport Links,Tutorials etc.]
*[https://www.elektormagazine.de/labs/adjustable-current-sink-with-integrated-clock-generator elektronische Last]


=== Wireless ===
=== Wireless ===
Zeile 84: Zeile 107:


=== Wandler RS232 auf 3,3V Logigpegel ===  
=== Wandler RS232 auf 3,3V Logigpegel ===  
[https://ftdichip.com/wp-content/uploads/2023/07/DS_USB_RS232_CABLES.pdf FTDI USB-RS232 Kabel 3V3]<br>
[[Datei:schema_interfaccia.gif|Alternativer Text]]
[[Datei:schema_interfaccia.gif|Alternativer Text]]


Zeile 117: Zeile 142:


*[http://wizwiki.net/wiki/doku.php?id=products:wiz550io:start Wiznet wiz550io]
*[http://wizwiki.net/wiki/doku.php?id=products:wiz550io:start Wiznet wiz550io]
*[https://github.com/Wiznet/WIZ_Ethernet_Library/tree/master c-Code Arduino IDE]


==== Serial ====
==== Serial ====
Zeile 132: Zeile 158:


==== Neopixel (WS2812) ====
==== Neopixel (WS2812) ====
 
*adrianotiger.github.io/Neopixel-Effect-Generator/
*[http://www.mikrocontroller.net/topic/322375 PIC12/PIC18/PIC24 WS2812 SPI Library]
*[http://www.mikrocontroller.net/topic/322375 PIC12/PIC18/PIC24 WS2812 SPI Library]
*[http://thesignalpath.com/blogs/2014/07/14/watcheditdeletetutorial-on-programming-the-neopixel-ws2812-rgb-leds-equipment-giveaway/ programming the neopixel]
*[http://thesignalpath.com/blogs/2014/07/14/watcheditdeletetutorial-on-programming-the-neopixel-ws2812-rgb-leds-equipment-giveaway/ programming the neopixel]
Zeile 141: Zeile 167:
*[https://learn.adafruit.com/madisons-neoclock-a-pic-kicad-neopixel-adventure/the-backstory Madison's NeoClock - A PIC + KiCAD + NeoPixel adventure]
*[https://learn.adafruit.com/madisons-neoclock-a-pic-kicad-neopixel-adventure/the-backstory Madison's NeoClock - A PIC + KiCAD + NeoPixel adventure]
*[https://learn.adafruit.com/the-pixif A simple, efficient SPI front-end for NeoPixels]
*[https://learn.adafruit.com/the-pixif A simple, efficient SPI front-end for NeoPixels]
*{https://www.elektormagazine.de/news/spi-zu-ws2812b-konverter-mehr-leds-mehr-leistung?utm_source=Elektor+Deutschland&utm_campaign=ee880f7954-EMAIL_CAMPAIGN_3_10_2022_9_41&utm_medium=email&utm_term=0_7096e266f6-ee880f7954-234235097&mc_cid=ee880f7954&mc_eid=d69e41c3cb SPI 2 Neopixl Converter]


==== DMX ====  
==== DMX ====  
Zeile 146: Zeile 173:
*[http://www.digital-enlightenment.de/usbdmx.htm USBDMX digital-enlightenment]
*[http://www.digital-enlightenment.de/usbdmx.htm USBDMX digital-enlightenment]
*[http://ftpusuarios.ono.com/freedmx/index.html Manolator dmx512]
*[http://ftpusuarios.ono.com/freedmx/index.html Manolator dmx512]
*[http://www.dmxcontrol.de/wiki/Interface-Entscheidungshilfe Interface-Entscheidungshilfe]
*[https://wiki-de.dmxcontrol-projects.org/index.php?title=Unterst%C3%BCtzte_Interfaces Interfaces DMX Control]
*[http://dmxchaser.de/v2/index.html RS232]
*[http://dmxchaser.de/v2/index.html RS232]
*[http://web.archive.org/web/20090124122934/http://dworkin-dmx.de/#dworkin-dmx Seriell/USB 2 DMX]
*[http://web.archive.org/web/20090124122934/http://dworkin-dmx.de/#dworkin-dmx Seriell/USB 2 DMX]
*Artnet
**[https://www.lightjams.com/artnetominator/ Artnet Debugger/Monitor]
**[https://chamsyslighting.com/ DMX Software free]
**[https://github.com/signorettae/ESP32-ArtNet-to-DMX ESP32 ArtNet to DMX]


== Embedded ==
== Embedded ==
Zeile 155: Zeile 186:


== Raspberry Pi ==
== Raspberry Pi ==
===== PiPico =====
*https://github.com/elehobica/pico_spdif_rx
* [https://www.hackster.io/bjnhur/how-to-add-w5500-ethernet-to-raspberry-pi-pico-python-2-77c78c how to add w5500 ethernet to raspberry pi pico ]
===== Pi =====
*[https://raspberrytips.com/anaconda-on-raspberry-pi/ anaconda on raspberry pi ]<br>
*https://www.strobelstefan.de/blog/2020/12/01/e-mail-versand-fuer-den-raspberry-pi-konfigurieren/<br>
*https://www.raspberrytips.com/python-send-emails-raspberry-pi/<br>
*https://forums.raspberrypi.com/viewtopic.php?t=330432 Desktop keine Menüleiste etc.<br>
*https://www.heise.de/hintergrund/Raspi-als-Samba-Server-konfigurieren-4903166.html
*https://nerdiy.de/de_de/raspberrypi-ordner-freigeben-und-unter-windows-als-netzlaufwerk-einbinden/ Netzwerkfreigabe Samba
* i2c http://www.avsk.net/fileadmin/redakteure/Dateien/Raspberry_Workshop/Erläuterungen_zur_Konfiguration_des_I2C.pdf
*python https://pypi.org/project/smbus2/
*https://test-wetterstation.de/temperaturmessung-mit-dem-raspberry-pi
*'' Raspi'' http://www.netzmafia.de/skripten/hardware/RasPi/RasPi_Install.html#DeviceTree
* ''1 Wire'' http://www.netzmafia.de/skripten/hardware/RasPi/Projekt-Onewire/index.html
*''Raspi Pressuresensor'' https://ciaduck.blogspot.com/2014/12/mpl3115a2-sensor-with-raspberry-pi.html
* ''Raspi Weatherstation'' [https://www.rs-online.com/designspark/the-raspberry-pi-weather-station-in-ten-minutes-flat?cm_mmc=DE-EM-_-DSN_20180806-_-DM134262-_-HB_URL&cid=DM134262&bid=849270942]
*''Hostname ändern ''https://www.howtogeek.com/167195/how-to-change-your-raspberry-pi-or-other-linux-devices-hostname/ <br>
*https://tightdev.net/category/Python Pi aufsetzen<br>
*''pibased securitysystem'' https://blog.haschek.at/2018/raspberry-pi-plus-deep-learning-security-system.html
*''Raspi readonly filesystem'' https://hallard.me/raspberry-pi-read-only/
*''personal Raspidatacenter'' [https://www.rs-online.com/designspark/raspberry-pi-4-personal-datacentre-part-1-ansible-docker-and-nextcloud?cm_mmc=DE-EM-_-DSN_20191118-_-DM256344-_-HB_URL&cid=DM256344&bid=1021680630]<br>
*PI Phyton
https://learn.sparkfun.com/tutorials/python-programming-tutorial-getting-started-with-the-raspberry-pi/all<br>
http://www.netzmafia.de/skripten/hardware/RasPi/<br>
https://www.raspberrypi-spy.co.uk/2013/03/raspberry-pi-1-wire-digital-thermometer-sensor/<br>
https://learn.adafruit.com/raspberry-pi-care-and-troubleshooting<br>
https://raspberrypiuser.co.uk/display-system-info-on-your-raspberry-pi-using-conky
===== Hardware Erweiterungen =====
https://raspiaudio.com/produit/audio<br>
update bookworm 64bit follow this steps:
''
Edit the config.txt file or, in Pi OS, type:
sudo nano /boot/firmware/config.txt<br>
comment out the line:
#dtparam=audio=on<br>
Add the line at the end of the file:
dtoverlay=hifiberry-dac<br>
Save and reboot your system.''
===== Befehle =====
*Prozessliste: ''top , htop''
*Systeminformationen ausgeben ''uname -a''
*Nutzer- und Gruppeninformationen ''id''
===== Autostart =====
*[https://www.dexterindustries.com/howto/run-a-program-on-your-raspberry-pi-at-startup/ Autostart 5 Methoden]
* Desktop
* https://christian-brauweiler.de/autostart-unter-raspbian/
* [http://raspberry.tips/raspberrypi-einsteiger/raspberry-pi-autostart-von-skripten-und-programmen-einrichten Autostart Varianten]
*[https://www.dexterindustries.com/howto/run-a-program-on-your-raspberry-pi-at-startup/ Autostart VariantenII]
* ''funktionierende Variante unter Buster''<br>
  1. in  /home/pi/.config/lxsession/LXDE-pi/ Datei autostart erstellen
  2. autostart editieren <br>
@lxpanel --profile LXDE-pi
@pcmanfm --desktop --profile LXDE-pi
@lxterminal --geometry=125x25 -e "/home/pi/Python/Sensehat_temperature.py"
@lxterminal --geometry=60x24 -e "/home/pi/Python/ADSB_Flights22bup.py"
@xscreensaver -no-splash
point-rpi


===== Backup =====
===== Backup =====
https://www.linux-tips-and-tricks.de/en/quickstart-rbk/<br>
https://www.linux-tips-and-tricks.de/en/quickstart-rbk/<br>
https://forum.planefinder.net/threads/cloning-booted-rpi’s-microsd-card-if-rpi-is-physically-accessable.1360/#post-9559
https://forum.planefinder.net/threads/cloning-booted-rpi’s-microsd-card-if-rpi-is-physically-accessable.1360/#post-9559
1. Install
  git clone https://github.com/billw2/rpi-clone.git
  cd rpi-clone
  sudo cp rpi-clone rpi-clone-setup /usr/local/sbin<br>
2. Device für Clone ermitteln:
  pi@raspizeropihole:~ $ lsblk
  NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
  sdb          8:16  1 14.6G  0 disk
  ├─sdb1        8:17  1  256M  0 part
  └─sdb2        8:18  1 14.4G  0 part
  mmcblk0    179:0    0 14.6G  0 disk
  ├─mmcblk0p1 179:1    0  256M  0 part /boot
  └─mmcblk0p2 179:2    0 14.4G  0 part /<br>
3. hier ist es sdb ==》
pi@raspizeropihole:~ $ sudo rpi-clone sdb
Booted disk: mmcblk0 15.7GB                Destination disk: sdb 15.7GB
---------------------------------------------------------------------------
Part      Size    FS    Label          Part  Size    FS    Label
1 /boot  256.0M  fat32  --              1      256.0M  fat32  --
2 root    14.3G  ext4  rootfs          2      14.3G  fat32  --
---------------------------------------------------------------------------
== Initialize: IMAGE partition table - FS types conflict ==
1 /boot              (47.5M used)  : MKFS  SYNC to sdb1
2 root                (2.8G used)    : RESIZE  MKFS  SYNC to sdb2
---------------------------------------------------------------------------
Run setup script      : no.
Verbose mode          : no.
-----------------------:
** WARNING **          : All destination disk sdb data will be overwritten!
-----------------------:
Initialize and clone to the destination disk sdb?  (yes/no): y
Optional destination ext type file system label (16 chars max): pihole311021
Initializing
  Imaging past partition 1 start.
  => dd if=/dev/mmcblk0 of=/dev/sdb bs=1M count=8 ...
  Resizing destination disk last partition ...
    Resize success.
  Changing destination Disk ID ...
  => mkfs -t vfat -F 32  /dev/sdb1 ...
  => mkfs -t ext4 -L pihole311021 /dev/sdb2 ...
Syncing file systems (can take a long time)
Syncing mounted partitions:
  Mounting /dev/sdb2 on /mnt/clone
  => rsync // /mnt/clone with-root-excludes ...
  Mounting /dev/sdb1 on /mnt/clone/boot
  => rsync /boot/ /mnt/clone/boot  ...
Editing /mnt/clone/boot/cmdline.txt PARTUUID to use 0d374dbf
Editing /mnt/clone/etc/fstab PARTUUID to use 0d374dbf
===============================
Done with clone to /dev/sdb
    Start - 17:00:06    End - 17:57:19    Elapsed Time - 57:13
Cloned partitions are mounted on /mnt/clone for inspection or customizing.
Hit Enter when ready to unmount the /dev/sdb partitions ...
  unmounting /mnt/clone/boot
  unmounting /mnt/clone
===============================
===== Cleanup / free Diskspace =====
* use '''Baobab''' for graphical View at diskusage (Dateimanager Rechte Mousetaste Festplattennutzung)
[[Datei:Baobab.png|mini]]
* sudo apt-get autoclean (apt Cache von unnütz gecachten .deb Packages cleanen)


===== Doku =====
===== Doku =====
* https://christian-brauweiler.de/autostart-unter-raspbian/
 
* [http://raspberry.tips/raspberrypi-einsteiger/raspberry-pi-autostart-von-skripten-und-programmen-einrichten Autostart Varianten]
*[https://www.dexterindustries.com/howto/run-a-program-on-your-raspberry-pi-at-startup/ Autostart VariantenII]
* [https://pinout.xyz GPIO Pinout]
* [https://pinout.xyz GPIO Pinout]
* running the command 'pinout'
* running the command 'pinout'
Zeile 178: Zeile 337:


===== Anwendungen =====  
===== Anwendungen =====  
 
* https://www.electromaker.io/tutorial/blog/how-to-stream-spotify-on-raspberry-pi Spotyfy Free DRM
* https://www.hackster.io/shahizat005/smart-control-of-raspberry-pi-fan-using-python-thingspeak-4841b2 Intelligente Kühlung
* https://www.hackster.io/shahizat005/smart-control-of-raspberry-pi-fan-using-python-thingspeak-4841b2 Intelligente Kühlung
* https://www.raspberry-pi-geek.de/ausgaben/rpg/2013/06/die-raspberry-pi-hardware-optimal-ausreizen/
* https://www.raspberry-pi-geek.de/ausgaben/rpg/2013/06/die-raspberry-pi-hardware-optimal-ausreizen/
Zeile 196: Zeile 355:
*http://www.netzmafia.de/skripten/hardware/RasPi/RasPi_GPIO_int.html
*http://www.netzmafia.de/skripten/hardware/RasPi/RasPi_GPIO_int.html
*https://www.kampis-elektroecke.de/raspberry-pi/raspberry-pi-gpio/interrupts/
*https://www.kampis-elektroecke.de/raspberry-pi/raspberry-pi-gpio/interrupts/
===== SPI-RFID/NFC =====
===== SPI-RFID/NFC =====
*https://tutorials-raspberrypi.com/reading-out-raspberry-pi-rfid-rc522-tags-nfc/
*https://tutorials-raspberrypi.com/reading-out-raspberry-pi-rfid-rc522-tags-nfc/
Zeile 220: Zeile 380:
  ''uname -a  gibt es alles aus, was es über ihr Linux weiß''
  ''uname -a  gibt es alles aus, was es über ihr Linux weiß''
  ''cat /proc/version ''  
  ''cat /proc/version ''  
''cat /etc/*-release ''
*[https://www.howtogeek.com/howto/ubuntu/set-the-default-terminal-emulator-on-ubuntu-linux/ ''Terminalemulation auswähler'']
*[https://www.howtogeek.com/howto/ubuntu/set-the-default-terminal-emulator-on-ubuntu-linux/ ''Terminalemulation auswähler'']
*''Backup SD-Card'' Roadkil's DiskImage V1.6
*''Backup SD-Card'' Roadkil's DiskImage V1.6
Zeile 237: Zeile 398:
* https://pi-hole.net/2017/02/22/what-really-happens-on-your-network-find-out-with-pi-hole/
* https://pi-hole.net/2017/02/22/what-really-happens-on-your-network-find-out-with-pi-hole/
* https://jankarres.de/uebersicht-aller-raspberry-pi-artikel/
* https://jankarres.de/uebersicht-aller-raspberry-pi-artikel/
piholesetup
# download https://www.raspberrypi.com/software/operating-systems/#raspberry-pi-os-32-bit Raspberry Pi OS Lite
# flash image mit etcher
# bootfs partition leere Datei ssh erstellen
=== Kodi ===
=== Kodi ===
*[https://superrepo.org/ Superrepo Installation etc.]
*[https://superrepo.org/ Superrepo Installation etc.]

Aktuelle Version vom 31. Oktober 2024, 20:09 Uhr

Elektronik

Datasheets

Messtechnik

Projects

To be categorized

Antennen

Hardware

PCB

Joule Thief

Online Design Tools

RGB

LED

RC Modellbau

Messzeugs

Wireless

Unterhaltungselektronik

Wandler RS232 auf 3,3V Logigpegel

FTDI USB-RS232 Kabel 3V3

Alternativer Text

Allgemeines Wissen

Communication

NP2M e*message

I²C

smbuslibrary Bustools

  • ADS1115
 4channel 16bit ADC ADS1115  https://learn.adafruit.com/adafruit-4-channel-adc-breakouts
 Beispiel https://smartypies.com/projects/ads1115-with-raspberrypi-and-python/
 Datasheet https://cdn-shop.adafruit.com/datasheets/ads1115.pdf
  • PCF8591
 AD/DA Wandler 8bit  http://cool-web.de/raspberry/raspi-ad-wandler-pcf8591-ueber-i2c-bus-ansteuern.htm
 AD/DA Wandler 8bit  http://bristolwatch.com/rpi/pcf8591.html

Ethernet

Serial

1-Wire BUS

Neopixel (WS2812)

DMX

Embedded

PIC

PIC- alles zu PIC Microcontrollern

Raspberry Pi

PiPico
Pi
  • PI Phyton

https://learn.sparkfun.com/tutorials/python-programming-tutorial-getting-started-with-the-raspberry-pi/all
http://www.netzmafia.de/skripten/hardware/RasPi/
https://www.raspberrypi-spy.co.uk/2013/03/raspberry-pi-1-wire-digital-thermometer-sensor/
https://learn.adafruit.com/raspberry-pi-care-and-troubleshooting
https://raspberrypiuser.co.uk/display-system-info-on-your-raspberry-pi-using-conky

Hardware Erweiterungen

https://raspiaudio.com/produit/audio
update bookworm 64bit follow this steps: 

Edit the config.txt file or, in Pi OS, type:
sudo nano /boot/firmware/config.txt

comment out the line:
#dtparam=audio=on

Add the line at the end of the file:
dtoverlay=hifiberry-dac

Save and reboot your system.
Befehle
  • Prozessliste: top , htop
  • Systeminformationen ausgeben uname -a
  • Nutzer- und Gruppeninformationen id
Autostart
* funktionierende Variante unter Buster

 1. in  /home/pi/.config/lxsession/LXDE-pi/ Datei autostart erstellen
 2. autostart editieren 

@lxpanel --profile LXDE-pi
@pcmanfm --desktop --profile LXDE-pi
@lxterminal --geometry=125x25 -e "/home/pi/Python/Sensehat_temperature.py"
@lxterminal --geometry=60x24 -e "/home/pi/Python/ADSB_Flights22bup.py"
@xscreensaver -no-splash
point-rpi
Backup

https://www.linux-tips-and-tricks.de/en/quickstart-rbk/
https://forum.planefinder.net/threads/cloning-booted-rpi’s-microsd-card-if-rpi-is-physically-accessable.1360/#post-9559 

1. Install
 git clone https://github.com/billw2/rpi-clone.git 
 cd rpi-clone
 sudo cp rpi-clone rpi-clone-setup /usr/local/sbin

2. Device für Clone ermitteln:
 pi@raspizeropihole:~ $ lsblk
 NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 sdb           8:16   1 14.6G  0 disk
 ├─sdb1        8:17   1  256M  0 part
 └─sdb2        8:18   1 14.4G  0 part
 mmcblk0     179:0    0 14.6G  0 disk
 ├─mmcblk0p1 179:1    0  256M  0 part /boot
 └─mmcblk0p2 179:2    0 14.4G  0 part /

3. hier ist es sdb ==》
pi@raspizeropihole:~ $ sudo rpi-clone sdb
Booted disk: mmcblk0 15.7GB                Destination disk: sdb 15.7GB
---------------------------------------------------------------------------
Part      Size    FS     Label           Part   Size    FS     Label
1 /boot   256.0M  fat32  --              1      256.0M  fat32  --
2 root     14.3G  ext4   rootfs          2       14.3G  fat32  --
---------------------------------------------------------------------------
== Initialize: IMAGE partition table - FS types conflict ==
1 /boot               (47.5M used)   : MKFS  SYNC to sdb1
2 root                (2.8G used)    : RESIZE  MKFS  SYNC to sdb2
---------------------------------------------------------------------------
Run setup script       : no.
Verbose mode           : no.
-----------------------:
** WARNING **          : All destination disk sdb data will be overwritten!
-----------------------:
Initialize and clone to the destination disk sdb?  (yes/no): y
Optional destination ext type file system label (16 chars max): pihole311021
Initializing
  Imaging past partition 1 start.
  => dd if=/dev/mmcblk0 of=/dev/sdb bs=1M count=8 ...
  Resizing destination disk last partition ...
    Resize success.
  Changing destination Disk ID ...
  => mkfs -t vfat -F 32  /dev/sdb1 ...
  => mkfs -t ext4 -L pihole311021 /dev/sdb2 ...
Syncing file systems (can take a long time)
Syncing mounted partitions:
  Mounting /dev/sdb2 on /mnt/clone
  => rsync // /mnt/clone with-root-excludes ...
  Mounting /dev/sdb1 on /mnt/clone/boot
  => rsync /boot/ /mnt/clone/boot  ...
Editing /mnt/clone/boot/cmdline.txt PARTUUID to use 0d374dbf
Editing /mnt/clone/etc/fstab PARTUUID to use 0d374dbf
===============================
Done with clone to /dev/sdb
   Start - 17:00:06    End - 17:57:19    Elapsed Time - 57:13
Cloned partitions are mounted on /mnt/clone for inspection or customizing.
Hit Enter when ready to unmount the /dev/sdb partitions ...
  unmounting /mnt/clone/boot
  unmounting /mnt/clone
===============================


Cleanup / free Diskspace
  • use Baobab for graphical View at diskusage (Dateimanager Rechte Mousetaste Festplattennutzung)
  • sudo apt-get autoclean (apt Cache von unnütz gecachten .deb Packages cleanen)
Doku
Monitoring
Anwendungen
OLED Python
GPIO-Interrupt
SPI-RFID/NFC
Dateisystem
#  sudo apt-get install ntfs-3g hfsutils hfsprogs

Netzwerk

System

  • Betriebssystem herausfinden cat /etc/os-release
uname -a  gibt es alles aus, was es über ihr Linux weiß
cat /proc/version  
cat /etc/*-release

Pihole

piholesetup

  1. download https://www.raspberrypi.com/software/operating-systems/#raspberry-pi-os-32-bit Raspberry Pi OS Lite
  2. flash image mit etcher
  3. bootfs partition leere Datei ssh erstellen

Kodi

Kali

Systemsetup

Displays

siehe PIC Display

Sensorik

Stromsensor Hallbasiert

RFID / NFC

Fahrradlogger

Wattmeter,Logger

Absolutdruck- Höhenmessung

Herzfrequenz

5,3kHz Empfänger nochmal

Abgerufen von „http://urspoulsen.bplaced.net/Mewi/index.php?title=Elektronik&oldid=2791“