3D Druck: Unterschied zwischen den Versionen
Wezi (Diskussion | Beiträge) |
Wezi (Diskussion | Beiträge) |
||
| (11 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
| Zeile 34: | Zeile 34: | ||
** [https://octoprint.org/#compatible-and-extendable Octoprint] | ** [https://octoprint.org/#compatible-and-extendable Octoprint] | ||
***[https://plugins.octoprint.org/plugins/gpiocontrol/ GPIO Control Plugin]<br> | ***[https://plugins.octoprint.org/plugins/gpiocontrol/ GPIO Control Plugin]<br> | ||
***[https://community.octoprint.org/t/setup-a-new-self-signed-ssl-certificate-on-octoprint-enable-https/30256 enable HTTPS] | |||
* '''Tutorials''' | * '''Tutorials''' | ||
**https://www.youtube.com/watch?v=sa-Y_PeFH4g | **https://www.youtube.com/watch?v=sa-Y_PeFH4g | ||
| Zeile 58: | Zeile 59: | ||
====== Anet A6 Changelog ====== | ====== Anet A6 Changelog ====== | ||
<div style="width:100%; | |||
color:#FF0000; | |||
background:#FFFF40; | |||
border: 1px solid black; | |||
border-radius:10px; | |||
text-align:center; | |||
font-size:1.0em | |||
font-style:bold"> | |||
<p>When you change saveable settings in the configuration files and | |||
re-flash, the new values don’t take effect right away. They are | |||
still overridden by the saved values in EEPROM. To get your new | |||
default settings into the EEPROM, use M502 followed by M500. </p> | |||
</div><br> | |||
* Firmware 2.1.2.2 -> 2.1.2.5 | * Firmware 2.1.2.2 -> 2.1.2.5 | ||
** OctoPrint: Update 1.10.2 -> 1.10.3 | ** OctoPrint: Update 1.10.2 -> 1.10.3 | ||
** File Check Plugin: Update 2024.3.27 -> 2024.11.12 | ** File Check Plugin: Update 2024.3.27 -> 2024.11.12 | ||
* | ----------------- | ||
* Firmware flashed 10.01.25 Changes:<br> | |||
Endstops now working different:<br> | |||
'''@ Configuration.h Section Endstopps'''<br> | |||
''#define X_MIN_ENDSTOP_INVERTING false --> true''<br> | |||
''#define Y_MIN_ENDSTOP_INVERTING false --> true''<br> | |||
''#define Z_MIN_ENDSTOP_INVERTING false --> true''<br> | |||
'''@ Configuration.h Thermal Settings :'''<br> | |||
''#define HEATER_0_MINTEMP 5 --> 15''<br> | |||
''#define BED_MINTEMP 5 --> 15''<br> | |||
'''Hotend'''<br> | |||
''#define DEFAULT_Kp 18.12''<br> | |||
''#define DEFAULT_Ki 0.90''<br> | |||
''#define DEFAULT_Kd 91.29''<br> | |||
'''Heatbed'''<br> | |||
''uncommented #define PIDTEMPBED''<br> | |||
''#define DEFAULT_Kp 546.82''<br> | |||
''#define DEFAULT_Ki 87.83'' <br> | |||
''#define DEFAULT_Kd 851.13''<br> | |||
while used with Octoprint:<br> | |||
'''@ Configuration_adv.h Section host''' <br> | |||
uncommented #define HOST_ACTION_COMMANDS | |||
Bedteperatur ca.20K zu niedrig, Offset +20°C in Octoprint eingestellt | |||
Cura Update 5.7.2 --> 5.9.0 | |||
StartG-Code PID Setings entfernt da in EEPROM | |||
------------- | |||
Send: M503 | |||
Recv: echo:; Linear Units: | |||
Recv: echo: G21 ; (mm) | |||
Recv: echo:; Temperature Units: | |||
Recv: echo: M149 C ; Units in Celsius | |||
Recv: echo:; Filament settings (Disabled): | |||
Recv: echo: M200 S0 D1.75 | |||
Recv: echo:; Steps per unit: | |||
Recv: echo: M92 X100.00 Y100.00 Z400.00 E95.00 | |||
Recv: echo:; Max feedrates (units/s): | |||
Recv: echo: M203 X400.00 Y400.00 Z4.00 E25.00 | |||
Recv: echo:; Max Acceleration (units/s2): | |||
Recv: echo: M201 X9000.00 Y5000.00 Z50.00 E10000.00 | |||
Recv: echo:; Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>): | |||
Recv: echo: M204 P1000.00 R1000.00 T1000.00 | |||
Recv: echo:; Advanced (B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>): | |||
Recv: echo: M205 B20000.00 S0.00 T0.00 J0.01 | |||
Recv: echo:; Home offset: | |||
Recv: echo: M206 X0.00 Y0.00 Z0.00 | |||
Recv: echo:; Material heatup parameters: | |||
Recv: echo: M145 S0 H200.00 B50.00 F0 | |||
Recv: echo: M145 S1 H230.00 B70.00 F0 | |||
Recv: echo:; Hotend PID: | |||
Recv: echo: M301 P18.12 I0.90 D91.29 | |||
Recv: echo:; Bed PID: | |||
Recv: echo: M304 P546.82 I87.83 D851.13 | |||
Recv: ok | |||
===== Wissen ===== | ===== Wissen ===== | ||
Aktuelle Version vom 12. Januar 2025, 17:21 Uhr
3D Druck
G-Code
- Viewers
- Referenz
Modelle
Software
- CAD
- Slicer
- Printserver
- Tutorials
Hardware
- Videos Aufbau Anet A6
- Mainboard
- 3D Touch Autoleveling
- Sonstiges
Anet A6 Changelog
When you change saveable settings in the configuration files and re-flash, the new values don’t take effect right away. They are still overridden by the saved values in EEPROM. To get your new default settings into the EEPROM, use M502 followed by M500.
- Firmware 2.1.2.2 -> 2.1.2.5
- OctoPrint: Update 1.10.2 -> 1.10.3
- File Check Plugin: Update 2024.3.27 -> 2024.11.12
- Firmware flashed 10.01.25 Changes:
Endstops now working different:
@ Configuration.h Section Endstopps
#define X_MIN_ENDSTOP_INVERTING false --> true
#define Y_MIN_ENDSTOP_INVERTING false --> true
#define Z_MIN_ENDSTOP_INVERTING false --> true
@ Configuration.h Thermal Settings :
#define HEATER_0_MINTEMP 5 --> 15
#define BED_MINTEMP 5 --> 15
Hotend
#define DEFAULT_Kp 18.12
#define DEFAULT_Ki 0.90
#define DEFAULT_Kd 91.29
Heatbed
uncommented #define PIDTEMPBED
#define DEFAULT_Kp 546.82
#define DEFAULT_Ki 87.83
#define DEFAULT_Kd 851.13
while used with Octoprint:
@ Configuration_adv.h Section host
uncommented #define HOST_ACTION_COMMANDS
Bedteperatur ca.20K zu niedrig, Offset +20°C in Octoprint eingestellt
Cura Update 5.7.2 --> 5.9.0 StartG-Code PID Setings entfernt da in EEPROM
Send: M503 Recv: echo:; Linear Units: Recv: echo: G21 ; (mm) Recv: echo:; Temperature Units: Recv: echo: M149 C ; Units in Celsius Recv: echo:; Filament settings (Disabled): Recv: echo: M200 S0 D1.75 Recv: echo:; Steps per unit: Recv: echo: M92 X100.00 Y100.00 Z400.00 E95.00 Recv: echo:; Max feedrates (units/s): Recv: echo: M203 X400.00 Y400.00 Z4.00 E25.00 Recv: echo:; Max Acceleration (units/s2): Recv: echo: M201 X9000.00 Y5000.00 Z50.00 E10000.00 Recv: echo:; Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>): Recv: echo: M204 P1000.00 R1000.00 T1000.00 Recv: echo:; Advanced (B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>): Recv: echo: M205 B20000.00 S0.00 T0.00 J0.01 Recv: echo:; Home offset: Recv: echo: M206 X0.00 Y0.00 Z0.00 Recv: echo:; Material heatup parameters: Recv: echo: M145 S0 H200.00 B50.00 F0 Recv: echo: M145 S1 H230.00 B70.00 F0 Recv: echo:; Hotend PID: Recv: echo: M301 P18.12 I0.90 D91.29 Recv: echo:; Bed PID: Recv: echo: M304 P546.82 I87.83 D851.13 Recv: ok
Wissen
- What is linear Advance
- Slic3r is Nicer - Part 1 - Settings and Extruder Calibration
- Why your 3d printed stuff doesn't fit together and how to fix it!
- Prusaslicer 2.3
- Anet-Profile Prusaslicer
- [1]
Filamente
Firmware Marlin
- Error while detecting libraries included by <path of .cpp file>
- Home of Marlin
- Marlin@Github
- complete guide how to configure marlin 2.0.x from scratch
- Diff's: Marlin V 1.x vs. V2.x
- Einfügen der Boarddefinitionen Anet[2] in portable ArduinoIDE:
- Anet A6L with Marlin 2.0
- Installation Marlin 2.0.x auf Anet A8 plus
- Anet Board 1.7 mit Bootloader flashen
- Pololu USB AVR Programmer v2 User’s Guide
Beim Versuch Marlin-1.1.9.1 mit ArduinoIDE zu compilieren erfolgt bei in configuration.h enabeltem Interrupt (Zeile 580) Compilerfehler:
// 578 Enable this feature if all enabled endstop pins are interrupt-capable. // 579 This will remove the need to poll the interrupt pins, saving many CPU cycles. // 580 #define ENDSTOP_INTERRUPTS_FEATURE
Arduino: 1.8.19 (Linux), Board: "Anet V1.0 (Optiboot)"
In file included from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/endstops.cpp:35:0: /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/endstop_interrupts.h: In function 'void setup_endstop_interrupts()': endstop_interrupts.h:121:7: error: non-constant condition for static assertion
static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "X_MIN_PIN is not interrupt-capable");
^21:56, 24. Apr. 2024 (CEST)21:56, 24. Apr. 2024 (CEST)~~
In file included from /home/maje22/bin/arduino-1.8.19/hardware/arduino/avr/cores/arduino/Arduino.h:258:0,
from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/HAL.h:36,
from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/MarlinConfig.h:39,
from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/Marlin.h:35,
from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/endstops.cpp:27:
/home/maje22/bin/arduino-1.8.19/hardware/anet/avr/variants/sanguino/pins_arduino.h:117:66: error: reinterpret_cast from integer to pointer
#define digitalPinToPCICR(p) ( (((p) >= 0) && ((p) <= 31)) ? (&PCICR) : ((uint8_t *)0) )
~^21:56, 24. Apr. 2024 (CEST)~
/home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/endstop_interrupts.h:121:21: note: in expansion of macro 'digitalPinToPCICR'
static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "X_MIN_PIN is not interrupt-capable");
^21:56, 24. Apr. 2024 (CEST)21:56, 24. Apr. 2024 (CEST)21:56, 24. Apr. 2024 (CEST)~
In file included from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/endstops.cpp:35:0: endstop_interrupts.h:141:7: error: non-constant condition for static assertion
static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "Y_MIN_PIN is not interrupt-capable");
^21:56, 24. Apr. 2024 (CEST)21:56, 24. Apr. 2024 (CEST)~~
In file included from /home/maje22/bin/arduino-1.8.19/hardware/arduino/avr/cores/arduino/Arduino.h:258:0,
from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/HAL.h:36,
from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/MarlinConfig.h:39,
from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/Marlin.h:35,
from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/endstops.cpp:27:
/home/maje22/bin/arduino-1.8.19/hardware/anet/avr/variants/sanguino/pins_arduino.h:117:66: error: reinterpret_cast from integer to pointer
#define digitalPinToPCICR(p) ( (((p) >= 0) && ((p) <= 31)) ? (&PCICR) : ((uint8_t *)0) )
~^21:56, 24. Apr. 2024 (CEST)~
/home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/endstop_interrupts.h:141:21: note: in expansion of macro 'digitalPinToPCICR'
static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "Y_MIN_PIN is not interrupt-capable");
^21:56, 24. Apr. 2024 (CEST)21:56, 24. Apr. 2024 (CEST)21:56, 24. Apr. 2024 (CEST)~
In file included from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/endstops.cpp:35:0: endstop_interrupts.h:161:7: error: non-constant condition for static assertion
static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "Z_MIN_PIN is not interrupt-capable");
^21:56, 24. Apr. 2024 (CEST)21:56, 24. Apr. 2024 (CEST)~~
In file included from /home/maje22/bin/arduino-1.8.19/hardware/arduino/avr/cores/arduino/Arduino.h:258:0,
from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/HAL.h:36,
from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/MarlinConfig.h:39,
from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/Marlin.h:35,
from /home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/endstops.cpp:27:
/home/maje22/bin/arduino-1.8.19/hardware/anet/avr/variants/sanguino/pins_arduino.h:117:66: error: reinterpret_cast from integer to pointer
#define digitalPinToPCICR(p) ( (((p) >= 0) && ((p) <= 31)) ? (&PCICR) : ((uint8_t *)0) )
~^21:56, 24. Apr. 2024 (CEST)~
/home/maje22/bin/arduino-1.8.19/portable/sketchbook/Marlin-1.1.9.1/Marlin/endstop_interrupts.h:161:21: note: in expansion of macro 'digitalPinToPCICR'
static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "Z_MIN_PIN is not interrupt-capable");
^21:56, 24. Apr. 2024 (CEST)21:56, 24. Apr. 2024 (CEST)21:56, 24. Apr. 2024 (CEST)~
exit status 1 non-constant condition for static assertion
Dieser Bericht wäre detaillierter, wenn die Option
"Ausführliche Ausgabe während der Kompilierung"
in Datei -> Voreinstellungen aktiviert wäre.
Kalibrierung
- https://teachingtechyt.github.io/index.html
- https://reprap.org/wiki/Triffid_Hunter's_Calibration_Guide
- https://github.com/slic3r/Slic3r/wiki/Calibration-of-Slic3r
PID Optimierung
in Anlehnung an: [3]
M503 gibt PID Werte aus:
Recv: echo:PID settings: Recv: echo: M301 P18.12 I0.90 D91.29 Recv: echo: M304 P546.82 I87.83 D851.13
- Hotend
folgene Befehle senden:
M106 S255 // Bauteillüfter ein M303 C8 E0 S190 U // PID Autotuning für Hotend 1, bei 190°C und 8 Messungen U speichert im EEPROM
nach Abschluss Autotune sollte etwas in dieser Art angezeigt werden:
Classic PID Recv: Kp: 18.12 Ki: 0.90 Kd: 91.29 Recv: PID Autotune finished! Put the last Kp, Ki and Kd constants from below into Configuration.h Recv: #define DEFAULT_Kp 18.12 Recv: #define DEFAULT_Ki 0.90 Recv: #define DEFAULT_Kd 91.29 Recv: ok
folgenen Befehl senden:
M107 Bauteillüfter aus
falls Speichern im EEPROM fehlschlägt in Start-G-Code:
M301 P18.12 I0.90 D91.29
- Heatbed
folgenen Befehl senden:
M303 C8 E-1 S60 U // PID Autotuning für Hotend 1, bei 190°C und 8 Messungen U speichert im EEPROM
nach Abschluss Autotune sollte etwas in dieser Art angezeigt werden:
Recv: bias: 85 d: 85 min: 59.80 max: 60.04 Ku: 911.37 Tu: 12.45 Recv: Classic PID Recv: Kp: 546.82 Ki: 87.83 Kd: 851.13 Recv: PID Autotune finished! Put the last Kp, Ki and Kd constants from below into Configuration.h Recv: #define DEFAULT_bedKp 546.82 Recv: #define DEFAULT_bedKi 87.83 Recv: #define DEFAULT_bedKd 851.13 Recv: ok
falls Speichern im EEPROM fehlschlägt in Start-G-Code:
M304 P546.82 I87.83 D851.13
in Octoprint sieht dann ein Temperaturdiagramm wie folgt aus:
Extruder kalibrieren
siehe: [4]
Druckprofil erstellen
siehe [5] Punkt Slicer Profil erstellen
Erstelle ein neues Slicer Profil mit folgenden Angaben: Neues Grundprofil (Default / Werkseinstellungen) - nichts voreingestelltes (auch kein vorgefertigtes)*
- Cura Neues Grundprofil (Werkseinstellungen)
| Parameter | Wert |
|---|---|
| Line Width (LW) Top/Bottom, Infill,Skirt/Brim | 0,40 (LW ≙ Düsendurchmesser) |
| Flow | PLA = 90% |
| PETG = 95% | |
| ABS/ASA /PC,/POM,/HIPS,/TPU= 100% | |
| Printing Temperature | Ermittelt durch Heattower |
| Layer Height (LH) | 0,1mm (ggf.Initial Layer Height 0,2mm) |
| Print Speed | 60mm/s |
| Wall Speed | 30mm/s |
| Flow Equalization Ratio | 0 (ab Cura 5.0) |
| Initial Layer Speed | 20mm/s |
| Top/Bottom Speed | 30mm/s |
| Minimum Wall Line Width/-Even/-Odd (ab Cura 5) | 0,3 |
| Wall Thickness | 0 |
| Wall Line Count | 2 |
| Top Layers | 10 |
| Bottom Layers | 10 |
| Infill Density | 15% |
| Infill Pattern | Grid |
| Retraction Distance | Direct Drive Extruder = 1,0 +/-0,5mm |
| Bowden Extruder = 3mm Grundeinstellung.
Oder für Profis - Bowdenspiel + 1,0 +/- 0,5mm ( Bowdenspiel ermitteln) Der Wert wird im Verlauf der Einstellungen noch genauer justiert. | |
| Retraction Speed | 25-50mm/s |
| Fan Speed | 100% (Automatik, bei ABS ggf. aus) |
| Diameter | Ermittelter Filamentdurchmesser (ggf. Printer Settings Plugin installieren), Vermesst neue Rollen mit einem Messschieber (Messuhr) über 10m, pro Messort 3x in verschiedenen Winkeln (alle 60°), bildet den Durchschnitt und notiert den FD (Filamentdurchmesser) gleich auf der Spule. |
| Wichtig ! | |
| Alternate Extra Wall | DEAKTIVIERT |
| Extra Skin Wall Count | 0 |
| Extra Infill Wall Count | 0 |
| Horizontal Expansion | 0 |
| Outer Wall Wipe Distance | 0 |
| Enable Ironing | DEAKTIVIERT |
| Enable Coasting | DEAKTIVIERT |
| Combing | OFF |
| Retraction Extra Prime Amount | 0 |
Alle nicht explizit angesprochenen Einstellungen bleiben beim Default Wert, werden also nicht geändert.
In der Firmware Linear Advance deaktivieren. (M900 K0 im Start Gcode schaltet lin_advance aus)
Dieses Profil mit den Grundeinstellungen ist die Grundlage für die folgenden Schritte.
Druckerconfig
Send: M503 Recv: echo:; Linear Units: Recv: echo: G21 ; (mm) Recv: echo:; Temperature Units: Recv: echo: M149 C ; Units in Celsius Recv: echo:; Filament settings (Disabled): Recv: echo: M200 S0 D1.75 Recv: echo:; Steps per unit: Recv: echo: M92 X100.00 Y100.00 Z400.00 E95.00 Recv: echo:; Max feedrates (units/s): Recv: echo: M203 X400.00 Y400.00 Z4.00 E25.00 Recv: echo:; Max Acceleration (units/s2): Recv: echo: M201 X9000.00 Y5000.00 Z50.00 E10000.00 Recv: echo:; Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>): Recv: echo: M204 P1000.00 R1000.00 T1000.00 Recv: echo:; Advanced (B<min_segment_time_us> S<min_feedrate>T<min_travel_feedrate> J<junc_dev>): Recv: echo: M205 B20000.00 S0.00 T0.00 J0.04 Recv: echo:; Home offset: Recv: echo: M206 X0.00 Y0.00 Z0.00 Recv: echo:; Material heatup parameters: Recv: echo: M145 S0 H200.00 B50.00 F0 Recv: echo: M145 S1 H230.00 B70.00 F0 Recv: echo:; Hotend PID: Recv: echo: M301 P17.27 I1.18 D62.94 Recv: echo:; Bed PID: Recv: echo: M304 P194.66 I31.27 D807.91 Recv: ok
