Aircraftmonitoring

Elon == N628TS

Flightaware

!! local feeder LAN only !!
my Data Sharing
Skyaware anywhere
https://blog.georgeglessner.com/simple-flight-logging/ Logging

FR24

my Data Sharing

RadarBox24

Radarbox24 feeder

MLAT Issue:
2) If you look at the local status page for your box you will notice that MLAT isn't working. This is because MLAT needs to know your exact station location and 
that's not been set yet. First, claim your box on radarbox.com (see (1) above). Once that's been done log into your radarbox.com account, click on 'Account' then 
'Stations' and select your station from the drop down list. I think that you will now be prompted for your station details, e.g. latitude/longitude/antenna height. 
If you're not prompted for these and you get your station map displayed click on the 'Edit' link next to your location (top left) and when prompted enter your 
details. Soon after you've stored your details MLAT will be automatically enabled on your box.

Opensky-network

OpenSky Network my Receiver data feeder

Adsbexchange

• how to feed
• skripte

MLAT Map Sharing Data

Planefinder

!! local feeder LAN only !!
Setup client
Feederdata

Zeug

https://www.flightradar24.com/data/flights/po956#3196a498
https://flightaware.com/live/flight/map/PAC956/history/20230814/1601Z/EDDP/EDDP

• Antennen
  • https://wifiexpert.us/customRFCable.php Cables
    
  • https://m0ukd.com/calculators/quarter-wave-ground-plane-antenna-calculator/ Groundplanecalculator
    
  • ADSB SDR Tutorial
    
  • Antennen
    
  • Coaxial Linear Antenne
    
  • J-Pole Antenne
    
  • https://www.balarad.net Antennen
    
  • https://forum.planefinder.net/threads/most-common-mistakes-in-construction-of-diy-ads-b-antennas.1285/ AntennenII

• Raspibased Skywatcher
• flugdaten auswerten rrd
• feed both FR24 und FA with Raspberry Pi 3 Model B+, FlightAware Pro Stick+
• http://www.satsignal.eu/raspberry-pi/dump1090.html
• http://zr6aic.blogspot.com/2013/02/setting-up-my-raspberry-pi-as-sdr-server.html
• https://www.bjoerns-techblog.de/2018/10/virtual-radar-server-auf-rpi/
• http://www.virtualradarserver.co.uk/Mono.aspx#mono-4-issues
• flying thru tunnel
• [1]
• https://www.bjoerns-techblog.de/2018/10/ads-b-wir-lauschen-den-flugzeugen/
• BaseStation Dataformat @ Port 30003 parsed
• Spectrumanalyse RTL-SDR+Soft
• [2]
• Orlando
• Last 747 DeliveryFlight

ADSB Station

• Flightaware - advanced configuration
• Flugdaten auswerten rrd
• FR24-und-FA-with-Raspberry-Pi-3-Model-B-FlightAware-Pro-Stick= feeding Flightaware and FR24 at same Time
• ADS-B using dump1090 for the Raspberry Pi
• Setting up my Raspberry Pi as a SDR Server with RTL-2832U USB dongle
• Virtual Radar Server auf RPi
• Virtual Radar Server mono4 issues
• Alternative Webinterface tar 1090
• Pro Stick® vs. Pro Stick® Plus Features

Setup PiZero for feeding PiAware + Flightradar24 at same time
--------------------------------------------------------------
1.  https://de.flightaware.com/adsb/piaware/build/DE
2.  http://piaware.flightcdn.com/piaware-sd-card-3.8.1.img.zip
3.  mit Etcher Image auf SD-Card brennen
4.  Reinsert SD Card
5.  leere Datei mit Namen ssh in boot-Partition erstellen
6.  SD-Card in Pizero starten
7.  ssh Verbindung herstellen
8.  Password ändern
9.  sudo nano boot/piaware-config.txt anpassen (WLAN aus, Feederkennung)
10. FR24 Support installieren: sudo bash -c "$(wget -O - https://repo-feed.flightradar24.com/install_fr24_rpi.sh)"
11. sudo raspi-config Timezone einstellen sonst funktioniert MLAT nicht

---

My ADSB Station

Changelog

• 06.08.22 Antennenkabel gewechselt Koax (SAT mit F-Stecker --> Aircell 7 Low Loss Kabel konfektioniert (5m) mit SMA)