Elektronik: Unterschied zwischen den Versionen
Aus Wiki_2020
Wezi (Diskussion | Beiträge) |
Wezi (Diskussion | Beiträge) |
||
| Zeile 149: | Zeile 149: | ||
==== Systemsetup ==== | ==== Systemsetup ==== | ||
*[[ | *[[Neueinrichtung komplett]] | ||
# Download Raspian-Image [https://www.raspberrypi.org/downloads/raspbian/] | # Download Raspian-Image [https://www.raspberrypi.org/downloads/raspbian/] | ||
# Image mit etcher [https://etcher.io/] auf SD-Card (min 16GB Class10) schreiben (190619: Versuch mit Transcend High Ensurance 16GB MLC Media) | # Image mit etcher [https://etcher.io/] auf SD-Card (min 16GB Class10) schreiben (190619: Versuch mit Transcend High Ensurance 16GB MLC Media) | ||
Version vom 29. Juni 2019, 09:51 Uhr
Elektronik
To be categorized
ADS-B
Antennen
Hardware
PCB
- Leiterplattenfertiger Bulgarien
- SamacSys PCB SChematic Librarys
- Samacsys new
- PCB Schematic Componentsearch
Joule Thief
- Joule thief
- joule thief based Solarlight
- some theoretics
- QUANTSUFF'S CIRCUIT PAGE
- 300mV Step-Up Wandler
- [1]
Online Design Tools
- Texas Instruments Power Management
- Analog Devices Signal Chain Designer
- Online circuit editor & Simulator
RGB
LED
RC Modellbau
Messzeugs
Wireless
Unterhaltungselektronik
Wandler RS232 auf 3,3V Logigpegel
Allgemeines Wissen
- Resources and Analyses for Electronic Engineers
- HP-Museum
- TI-Museum
- allerlei Software/Hardware
- Advanced Serial Protocol Analyzer 232Analyzer [RS232, Diagnose, Software]
- Device Monitoring Studio [RS232, Diagnose, Software]
Communication
Ethernet
Serial
1-Wire BUS
- Appnote 1-Wire
- Overview of 1-Wire Technology and Its Use
- 1-WIRE LIBRARY FOR P12,16 AND 18 SINGLE AND MULTIDROP DEV.
Neopixel (WS2812)
- PIC12/PIC18/PIC24 WS2812 SPI Library
- programming the neopixel
- WS2812 -Protokoll in Detail
- ws2811 CCS C-Code
- [2]
- NeoPixels Revealed: How to (not need to) generate precisely timed signals
- Madison's NeoClock - A PIC + KiCAD + NeoPixel adventure
- A simple, efficient SPI front-end for NeoPixels
DMX
Embedded
PIC
PIC- alles zu PIC Microcontrollern
Raspberry Pi
- http://yannickloriot.com/2016/04/install-mongodb-and-node-js-on-a-raspberry-pi/ MongoDB
- mit ext4 formatieren mkfs -t ext4 /dev/sda1
- DHCPCD Manual (static IP)
- Netzwerkprobleme lösen
- remote control with weaved
- MAC-Adresse
- Internetzugriff
- AV-Connector
- WLAN
- https://linuxundich.de/raspberry-pi/linux-images-fuer-den-raspberry-pi-auf-sd-karte-installieren/
- https://www.bitblokes.de/sd-karte-des-raspberry-pi-sichern-dd-oder-partclone/
- http://s6z.de/cms/index.php/raspberry-pi/52-usb-stick-einbinden
- http://kompf.de/weather/pibaro.html
- https://tutorials-raspberrypi.de/raspberry-pi-sensoren-uebersicht-die-50-wichtigsten-module/
- https://pi-hole.net/2017/02/22/what-really-happens-on-your-network-find-out-with-pi-hole/
- https://sccmchris.com/2018/03/21/creating-a-headless-dns-based-adblocker-with-pihole-on-a-raspberry-pi-zero-w/
- https://jankarres.de/uebersicht-aller-raspberry-pi-artikel/
Kodi
Kali
Systemsetup
- Download Raspian-Image [3]
- Image mit etcher [4] auf SD-Card (min 16GB Class10) schreiben (190619: Versuch mit Transcend High Ensurance 16GB MLC Media)
- in boot-Partition leere Datei namens ssh einfügen (richtet SSH Zugriff für headless Systeme ein)
- SD-Card in Raspi --> booten
- menü -> Einstellungen -> Raspberry-Pi-Konfiguration
* * Aufgezählter Listeneintrag * Aufgezählter Listeneintrag
- sudo apt-get install ntfs-3g hfsutils hfsprogs
